Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2001 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

steering box lower seal replacement 120-130

posted by  Danny on  Thu Jun 21 19:11 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 6 22:01 CST 2014
[RELATED]

I've got a pretty serious leak at the bottom of my steering box. I've R&R'ed a number of these complete, but I've never been into one. It has no slop and lots of adjustment left showing (threads above the stop nut), so I'm not looking to tear it down and rebuild it, but I would like to replace the seal.

How much of a job is this, and can I just pull the pitman arm and remove and replace the seal? I haven't pulled the arm yet, but am hoping that once I do, with the car on a lift, I'd be able to pull the seal out and install a new one without special tools. Thinking I could drill a small hole(s) in the metal in the seal and use a small slide hammer grabbing a screw in the hole to pull it.

Anybody had experience with this?

thanks





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New steering box lower seal replacement [120-130]
posted by  Danny  on Thu Jun 21 19:11 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.