Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rapid prototype file for Tach plug 200 1988

posted by  strongcraig on  Mon Nov 5 18:35 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Apr 10 08:43 CST 2013
[RELATED]

I bought a Tach off ebay but no plug for the hole where the clock adjustment pin currently sits.

I have a rapid prototype machine at work. Printed it off today.

STL file or you can order from Shapeways here: http://www.shapeways.com/model/763072/volvo_240_tachometer_plug.html?key=24c7857475fa518e9da4487358a8e262

The rubber washer is 3.5mm thick, 14.75mm diameter, 4.75mm inside hole. I used some softer foam and just cut a slit in the middle. Looks like it will work fine.

I wish the trim piece around my center vents were as easy to draw in CAD.








<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.