Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Tips requested to mount the hood mascot on a PV 444-544

posted by  59445 on  Tue Feb 12 20:59 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 00:40 CST 2014
[RELATED]

Hello PVers,
Thanks to one of our own, Paul Malloy, I was able to purchase a reproduction PV hood mascot on eBay (thanks Paul). For some unknown reason it comes without the plexiglass insert. I went on-line & found a fellow in Utah who made one up for me for $15. Attached a photo of the finished product. What do you think?
All that remains now is to properly mount it. I found one (1) photo of a mounted PV hood mascot, which is shown below. A couple of questions, please. First, it doesn't seem right that the front support is metal to metal with the hood. Anyone address before ie adding some kind of grommet to protect the hood, while still keeping the aesthetics? Also, the rear mounts, from the photo it doesn't appear that there is any protection there, either. Suggestions?
Anyone have any better photos of a hood mascot? That would be great. The one below is the ONLY one I was able to find on the internet.
Thanks.







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tips requested to mount the hood mascot on a PV [444-544]
posted by  59445  on Tue Feb 12 20:59 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.