Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2006 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'93 940 Air Intake Replacement Part Problem 900

uid 54671's pic
posted by  JBMorris on  Mon May 13 17:01 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 23 18:55 CST 2013
[RELATED]

Hi All,
Noticed the Volvo was idling a bit rough at startup so consulted the Haynes manual to do some research.
It talked about base idle and the illustration 11.32 showed a hose from the idle air control valve connecting to the air inlet.

My car has a stub for the hose but it's not used and the plastic body is blanked off so that no air can pass through it.

Feeling around under the rubber accordion looking for a missing connection (?) led to a major tear in the rubber, allowing dirty air to enter the intake manifold.

Took the part # from the rubber inlet and ordered a replacement from local Parts International but it's not correct, this is what's listed:
--
James Brien Morrissey






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '93 940 Air Intake Replacement Part Problem [900]
posted by  JBMorris  on Mon May 13 17:01 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.