Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

baseline idle adjuster missing on 88 240 dl 200

posted by  maplebones on  Wed Oct 8 18:31 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 22:53 CST 2014
[RELATED]

I can't find any adjuster on this new to me car, although Bentley claims that's how idle is adjusted on the 2.2 LH. There's a hole in the bottom of the throttle body where it could fit, but it's been filled with what looks like a frost plug. It looks stock to me.

I'm curious whether it's been tinkered with, or if there's another way to adjust the base idle speed.

Another question I have which may be related. Is there any reason why the IAC valve on an 87 would be different from one on an 88? I'm trying to replace mine with a used one and have found a used one from an 87 but it has a different part # than mine. They look identical from the outside , both 3 wire.

I have the part #s, both Bosch and Volvo, but I'm not sure what to do with them.

Thanks for any help, Peter






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New baseline idle adjuster missing on 88 240 dl [200]
posted by  maplebones  on Wed Oct 8 18:31 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.