Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2008 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

94 940 turbo head gasket replacement 900 1994

posted by  mikkowus on  Sun Nov 2 19:56 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Blew the head gasket on my 940 turbo. Had the head milled. A mechanic friend of mine told me to close each vavle and put a little oil in the port and see if the valvle closed fully. One port seems to leak oil. It has a little rust on it and I would guess that might hold the valve open slightly. Is there a common way to clean the valve without taking the head apart? I don't want to scratch it up or damage it in any way. I would like to test the valve without having to take the head completely apart.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 94 940 turbo head gasket replacement [900][1994]
posted by  mikkowus  on Sun Nov 2 19:56 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.