Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear bushings 200

posted by  swebb CO on  Mon Nov 3 22:14 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:52 CST 2014
[RELATED]

My 85 250 wagon needs a bushing or three in the back. This will be my second time doing rear suspension bushings on a 240, and although it has been many years since the first round, the painful memory is still fresh.

A few questions:

1. I see that IPD sells aftermarket and OE rubber bushings. The aftermarket are about $60 for the set, and the Volvo ones are over 5 times as expensive. Does anyone have experience with the less expensive ones? If they will last 5 years, that's plenty good enough for me.


2. Is this job significantly easier with a hydraulic press? Is this the type of job where I could take a bundle of parts to a shop and have them press the bushings in for a reasonable price?

-Steve





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear bushings [200]
posted by  swebb CO  on Mon Nov 3 22:14 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.