Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear rotor stuck on parking break 200 1989

posted by  mjohnson on  Sun Apr 24 14:56 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I'm working to replace the rear rotors and pads on my '89 240. When I got around to removing the rotor I realized it's not coming off. I doused it in WD40, pryed, pounded, and not a budge. It's turning fine but I hear it scraping on the parking brake pads (or what's left of them). I think my problem is that the rotor is hung up on the shoes. In my manual it's saying to loosen the little star screw but it dosen't looks like my car has one. I tried loosening the screw on the back of the parking brake handle to no avail. Any suggestions on how to loosen it up enough to get my rotor off?

Thanks in advance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear rotor stuck on parking break [200][1989]
posted by  mjohnson  on Sun Apr 24 14:56 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.