Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2002 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Mystery Tach Wire 1800

posted by  Dave B on  Fri Aug 12 08:33 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Sep 26 19:07 CST 2014
[RELATED]

I'm about to give up on my MSD box installation because i can't seem to get my Smiths tach to work with it. Worked fine with the Pertonix igniter and the MSD Blaster Coil, but when I try to integrate the MSD 6T box, no go, even with the addition of a TachMatch TM-03. (BTW, Brian at TachMatch has been a prince through this.)

in any case, as i continue to experiment, I am perplexed by the Green/White wire that connects to the 1/4" spade connector adjacent to the red and white wire, current sensing coil terminals. I can't see a reference to this wire on any 1800E wiring diagram. And there seems to be no continuity between that terminal and any other parts of the tach. Can someone advise me on the function of this wire? And if it has anything to do with the actual operation the tach?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Mystery Tach Wire [1800]
posted by  Dave B subscriber  on Fri Aug 12 08:33 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.