Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

clutch cylinders opinions 120-130 1967

posted by  riverbend on  Tue Apr 4 20:17 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:29 CST 2014
[RELATED]

When I mounted the clutch operating cylinder there was a little bit of fluid running down the rubber boot. Behind the boot was a little blob of silvery paste. The cylinder is not very old, the bleeder screw isn't even rusty, but it appears to be failing.

My first inclination is to rebuild, that way I know what I've got. What do you think, new, rebuilt, rebuild ?

BTW the clutch master cylinder was filled with some sort of gray goop. Never a good sign, but with a newish slave cylinder it seemed really odd. The cap is the same thread as the Ate dual brake master, so the brake bleeder hooks right up.

Anyway, what have you had the best results with - new, rebuilt, rebuilding ?

Greg





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New clutch cylinders opinions [120-130][1967]
posted by  riverbend subscriber  on Tue Apr 4 20:17 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.