Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2008 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Voltage Stabilizer Mounting Location 1800 1973

posted by  Chris Mullet on  Sat Dec 2 16:31 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:08 CST 2014
[RELATED]

The dash in my 1800ES has been torn apart too long! I can't recall where the oil pressure / oil temp / fuel gauge voltage stabilizer actually mounted. The wire lengths suggest it's in the vicinity above behind the tach or speedo. The size of the hole in the mounting tab suggest it's a rather small screw that secures it. The wiring diagram suggests it needs a solid mount to ground. Does it share a speedo or tach mounting post, held in place by one of the thumb nuts?

Wait, I remember one of the mounting posts had two thumb nuts for some reason - did I just answer my own question??






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Voltage Stabilizer Mounting Location [1800][1973]
posted by  Chris Mullet subscriber  on Sat Dec 2 16:31 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.