Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

tightening my A frame 200 '88

posted by  someone claiming to be roger on  Tue Feb 27 01:26 CST 2001 [RELATED]

can i reemove the knuckle that holds my a frame to the car frame and then replace it without having the need for added 'push'?? i have been retorqueing my suspension bolts but could not get to the A frame bolt behind this knuckle piece. the only way i could see getting to it easily was to remove the knuckle, tighten it and then replace the knuckle. is there any pressure besides the weight of the A frame that will keep me from just lifting it back by hand and tightening it back??

thanks for the help.....





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New tightening my A frame [200]['88]
posted by  someone claiming to be roger  on Tue Feb 27 01:26 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.