Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Who has info or ideas on converting 240 brakes onto a 122? 120-130 67

posted by  someone claiming to be Alan on  Tue May 1 17:36 CST 2001 [RELATED]

I had soo much fun converting my 145's motor over to a B23F that I've turned my eyes to the rusty 122. I've fitted it with KE-jet so far, now I'm looking to stop better.

I've seen sevral cars on the volvonet.org with foot notes about the cars having 240 running gear and seen pics in the gallery with 240 master cycl's in em. I talked briefly with a guy in Canada that had done it to his 122. The rear is not so much of a problem, I can weld on the needed mounts to a 240 rear end. Now that I've set my self to doing it, I need any and all info I can get.

I do know that the bolt mount spacing for the calipers differs in width by about 1/2". Also the spindle on the 122 is about an 1/8 in smaller in diameter on the inside (larger) bearing.

Any help would be appreciated.

Thanks





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Who has info or ideas on converting 240 brakes onto a 122? [120-130][67]
posted by  someone claiming to be Alan  on Tue May 1 17:36 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.