Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Steering Failed during State Inspection 200 1983

I have a 244 with about 195K miles on it and it recently failed the state safety inspection. With hands on the each front wheel at 3 and 9 o'clock I can feel play in the steering. With hands at 6 and 12 o'clock both wheels are very tight. The inspection station told be that the tie rod end was worn, however, I've checked both tie rod ends and they appear to be tight.

The steering rack is tightly secured to the frame and it appears that the play may be in the rack itself. I really don't want to replace the steering rack if I can avoid it. Has anyone experienced similar problems? Appreciate hearing from you and your comments.

Thanks.







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Steering Failed during State Inspection [200][1983]
posted by  someone claiming to be Ray Gatti  on Tue Jul 3 05:42 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.