Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Major boneheaded maneuver (or 'dropped nut down into lower timing belt cover') 700 1988

Hi,

Today I was almost done replacing the water pump when I sheared off the upper bolt. Luckily, there was enough of the bolt left sticking out that I was able to get ahold of it and extract it with a pair of vice grips. Unfortunately, while removing the nut that goes on the rightmost stud I dropped the nut down into the lower timing belt cover. I don't want to remove the cover, as this would require removing the lower pulley. How can I get the nut out? I tried using a long slender magnet, and one of those spring loaded "grabber" things, but had no luck. The nut has ended up in the very bottom of the cover, so I can't actually see it.

Thanks!

Esau






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Major boneheaded maneuver (or 'dropped nut down into lower timing belt cover') [700][1988]
posted by  Esau  on Sat Feb 2 19:18 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.