Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

avoiding brake failure with creativity 200 1978

posted by  chris mcmorrow on  Tue Feb 19 12:25 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

i recently purchased a [used] '78 GT spoiler for my '78 245. i read the warning label on it and it said that adding the spoiler to cars that are not a 240/260 and do not have aluminum wheels, may cause brake failure.

i'm guessing this happens because the brakes wont receive sufficient cooling. so what would be my best choice? adding small cooling fans behind the spoiler to cool the brakes, or make "intake" tubing pointing towards the wheels. im planning on making extra intakes to the airbox, i can just add extra ones to send to each wheel.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New avoiding brake failure with creativity [200][1978]
posted by  chris mcmorrow  on Tue Feb 19 12:25 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.