Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Replacing oil return line for 940 Turbo 900 1992

posted by  Paragrad on  Sun Mar 24 09:01 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi all,
I have a 92' 940 Turbo and it has been leaking oil. I recently had it checked by a mechanic and he verified that the oil return hose was bad on it and needed to be replaced.
I would like to do the replacement myself. Can the turbo's oil return hose & gasket be replaced without taking it into a shop? I have enough tools in my garage; is this job too big/extensive to do in my own garage?
Thanks for the prior suggestions on my previous related post. I would greatly appreciate any further help you all can provide.
Sincerely,

Josh






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing oil return line for 940 Turbo [900][1992]
posted by  Paragrad  on Sun Mar 24 09:01 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.