Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Turbo Return line. 200

posted by  mark h. on  Tue Apr 23 17:40 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed May 9 03:45 CST 2001
[RELATED]

I just solved an oil leak at the point the oil return line attaches to the turbo. Now the end going into the block is leaking. There is very little pressure but enough to push out an unacceptable amount of oil. I nearly lost my mind curing the leak at the top end of this pipe and if it wasn't for the help of a friend I would have.I DO NOT want to pull this thing off again. I thought about cleaning the port in the side of the block with carb cleaner and plugging around the pipe with RTV. Am I nuts, or is it worth a shot? If anyone has a product that might stick let me know.

Mark






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turbo Return line. [200]
posted by  mark h.  on Tue Apr 23 17:40 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.