Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Running Very Rough 200 1993

I have a 1993 240 with the B230F engine. The car was running just fine until I decided to clean the engine to search for an oil leak. I used a foaming type spray and rinsed the engine with a hose. The engine is now nice and clea BUT it now runs like crap. It idles so rough it looks like the engine wants to jump righ out of the car. I can pump the gas and smooth out the idle but if I try to drive it it feel like I have a weed wacker motor under the hood. I let the car sit for three days to help dry it out and its still the same .I checked the codes and got a 2-1-4 "engine speed sensor faulty" I then tested it through the input sensor mode and it showed ok. I have a feeling that I have literelly hose my engine. Can anyone help.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Running Very Rough [200][1993]
posted by  bill240  on Wed May 1 13:08 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.