Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

wierd thump after bushing changes 200 1977

Greetings all-

I have recently changed the bushings in my brick, without any serious problems. The car drives alot better now, but I am getting a wierd thumping sound. The thumping happens when I first start the car (it is not moving), and it sounds like it is coming from the rear passenger side. At first, I thought it might be the exhaust pipe hitting something, but I crawled underneath the car and everything seems tight. I find it strange because it happens when I am not moving, and it goes away when the car warms up. I never had this problem before the did the bushings. When I changed the bushings in the rear, I took all of the parts off (torque rod, panhard, and rear control arm) the car and gently laid the rear axle down. The I had the bushings pressed in, then out again, and put it all back together. I am assuming that everything is lined up, since the assembly went well. Any ideas?

Thanks-

Joe HC
--
1977 244, B21F engine, 140K, "carlsbad yellow", IPD anti-sway bars, Minneapolis, MN






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New wierd thump after bushing changes [200][1977]
posted by  Joe HC  on Thu May 9 15:54 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.