Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Control Pressure Regulator Assembly 200

posted by  someone claiming to be John Lenehan on  Thu May 9 18:13 CST 2002 [RELATED]

Hi Everyone, I've a 265 that's a dog to start when cold. I've pulled the
control pressure regulator apart to make sure nothing has siezed but didn't
take note of the order of the 2 thin round metal disks in the valve. One has
a small hole in it, the other doesn't.

Does anyone know the correct order? Currently I have the thick disk, one
with the hole, then the solid disk. (car still doesn't run cold). Before I
swap them I thought I should see if this is correct or not.

Thanks






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.