Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

87 240 Front Brake job - Virgin DIY seeks guidance 200

posted by  Tom F on  Thu Jun 6 05:45 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I am preparing to replace the front pads and rotors an my 87 245. I've never done this before. I have new ATE rotors, PBR pads and teflon shims. I have the Bentley manual. Before I begin, I ask the following:
1. Are there any special tools that are necessary or would make the job easier?
2. Are there any special procedures/precautions that I should be aware of?
3. Is it important to check runout? Is there an easy way to do this?
4. Do I have to remove the calipers? If so, do I replace the bolts?
5. Any other potential surprises?

Any thoughts are appreciated. Thanks





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 87 240 Front Brake job - Virgin DIY seeks guidance [200]
posted by  Tom F  on Thu Jun 6 05:45 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.