Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2024 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Tailpipe removal suggestions? 200 1987

posted by  kourt99 on  Fri Jul 12 03:36 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 10:58 CST 2014
[RELATED]

I am fixing up the exhaust on my 87 245. I got a new catalytic converter (made by Bosal) and a new tailpipe (made by Starla) from FCPGroton. The cat went on just fine, but I'm having trouble getting the old tailpipe off the rear muffler.

The tailpipe is the S-shaped variety. I can see that it has a lot of rust inside. I have removed the clamp, and have used some WD-40 to unstick it, but to no avail. I have tried simply grabbing and twisting, but still that doesn't free it up. I have tried running the car (to heat up the metal), then doing the WD-40 thing again, and then twisting--still won't budge. The steel is still strong enough that I would have to use about 20 Dremel cutting wheels to get it off.

I'm looking for some sage advice on unsticking the tailpipe. Anyone got some ideas that have been successful? Thanks in advance.

kourt
87 245





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tailpipe removal suggestions? [200][1987]
posted by  kourt99 subscriber  on Fri Jul 12 03:36 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.