Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

cant get universal joint off of steering gear 200 1987

posted by  Pottzie on  Mon Sep 9 12:48 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 12 14:40 CST 2012
[RELATED]

I'm pulling the rack and pinion off of a dono 1987 240 and everything is going ok until I get to the universal on the bottom of the steering shaft.Pulled both nuts and bolts out,have spread the"pinch"joints,and pryed on the stub sticking thru the joint(from the rack).Spent the afternoon getting nowhere but frustrated,and the damn blowtorch is calling my name!Seeems like there oughta be an easier way,or,as usual,is there some blatently apparent solution that is painfully obvious to everyone but me?Thanks for any help.Pulling out the steering column seems to be the only option! Pottzie






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New cant get universal joint off of steering gear [200][1987]
posted by  Pottzie  on Mon Sep 9 12:48 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.