Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Do I need to take out the engine to RR the oil pump?? 200 1983

posted by  raidman on  Tue Sep 10 09:35 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 4 22:17 CST 2014
[RELATED]

SAD news..oil pressure on freshly rebuilt and installed B23 is 3psi at idle and 20 at 1500 rpm. I stupidly used the old oil pump (only had 100K miles). Now to order a new one and plan to install it. Do I have to remove the engine to do this? Is it as easy as it sounds in Haynes to drop the axle member by using longer bolts and removing the steering rack,brake lines,etc. What would you Volvogurus do?
I feel it might be that the seals for the tube to carry the oil up were not installed correctly...either way I have to replace or remove the oil pump.
GIA, el Raidman






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Do I need to take out the engine to RR the oil pump?? [200][1983]
posted by  raidman  on Tue Sep 10 09:35 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.