Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

My trans has two threaded holes with no bolts in them - got a question 200

posted by  someone claiming to be diyer on  Mon Sep 30 10:21 CST 2002 [RELATED]

89, 245
150,000


The other day when I was under the car I noticed that there were two threaded bolt holes with no bolts in them. There is a funnel shaped part and the two holes are on the sides and out toward the edge of the fat side of the funnel-shaped-thingy, the trans side, not the Universal side. The trans is right in front of the funnel shaped thing. I was wondering if these holes are supposed to be empty or if they need bolts. I thought maybe there was a trans. option that was not installed on this particular car, but doubt that. Then I thought it might be for putting a puller on the funnel thing to get it off?

Don't have a clue. Volvo says they might be M10 x 45 mm x 1.25 mm pitch? But they are not sure either. No torque seems to be listed either. The bolts have three different numbers: #1239883, #1239884, and #6814808.

Anyone know if the trans needs these bolts?

Thanks,
diyer







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.