Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

In-tank Pump Modification for K-Jet ? 200 1980

posted by  MartyNJ on  Fri Oct 4 03:58 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 21 19:49 CST 2010
[RELATED]

I've recently read about the necessary upgrade to a 740T intank pump on K-jet 240's. This would explain my fuel pump noise and stumblimg on acceleration when tank is half full. I did just replace the in-tank pump, though with the OEM A/C type, about 5K miles ago which did help drop the stumbling and noise from all the time, to only when tank is 1/2 full.

So my questions are what pump to get, and what are the modifications I'll need to do? Special tools? Clamps? Measuring? etc.

FCP sells about 6 different pumps for the 740T.

Thanks in Advance
Marty


80 242 DL, 84 245 DL, IPD Lockring tool!!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New In-tank Pump Modification for K-Jet ? [200][1980]
posted by  MartyNJ  on Fri Oct 4 03:58 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.