Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2010

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Front Wheel Bearing Q 740

posted by  arsenix on  Thu Oct 17 04:09 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a simple question about the front wheel bearing nut. I have an '88 with two piece hub, and I can't seem to find the proper torque spec for the nut on it. I have found conflicting information about it over the years, I have a haynes that says low torque and a Chilton that says high torque. In the 700/900 FAQ I believe it says to do a minimal preload, but I thought this was only for the one-piece hubs... Can anyone clear this up? I would be infinitely grateful! Thanks!

james peverill
'88 745tic






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front Wheel Bearing Q 740
posted by  arsenix  on Thu Oct 17 04:09 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.