Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Switched to high beams, all electical shut down, engine died 200 1984

posted by  SwedishHearse1 on  Wed Oct 23 14:13 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Wow,this is definately an exciting occurance when you are driving. Car has been parked for about 3 weeks. While driving the family home from a late movie, I pulled back on the turn signal stalk to change beams, when ZIP, off go the lights, radio, and engine. I pulled to the side of the road, opened the hood, wiggled wires, but no change. Then about 2 minutes later, I heard the door chime, and everything was back to normal. I did not mess with the beam selector after that. Got home, tried to duplicate the problem, no luck. Any suggestions besides engine grounds?
Thanks in advance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Switched to high beams, all electical shut down, engine died [200][1984]
posted by  SwedishHearse1  on Wed Oct 23 14:13 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.