Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2006 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replaced everything, still noisy 900 1992

posted by  vmili on  Sun Nov 3 16:22 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 27 19:31 CST 2014
[RELATED]

This one's had me stumped for a few months.

I replaced the exhaust from the cat back with a "Starla/Walker" system, and sealed all the joints in the exhaust with copper sealant. The exhaust shields are still solid and intact. I also replaced the transmission mount and center support bearing and carrier. All is good and fairly quiet until I in the range of 3100 - 3300 rpm. Then a booming noise begins. Kind of like a blown exhaust. Above and below this rpm range, it seems to go away. It's driving me crazy because this is the rpm range where I do a lot of highway driving.

My sincere gratitude to anyone who can help. Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replaced everything, still noisy [900][1992]
posted by  vmili  on Sun Nov 3 16:22 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.