Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hood adjustment 200

posted by  schwied on  Mon Nov 4 07:02 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jun 16 13:12 CST 2013
[RELATED]


Bricks,

I was wondering if I can get some advice on adjusting the hood fit on my '87
240.

The original problem was that the hood hinges got dry, which made the hood hard to open and close. After I lubed the hinges, I noticed that the rear of the
hood sat up too high--that is, it was 1/4" or so above the level of the body.
(Evidently lowering the hood with dry hinges "jacked" the rear of the hood up.)

I lowered the rear of the hood as much as possible (to the maximum allowed by the adjusting slots on the hood hinge bolts) but the rear of the hood still sits up too high. Front height, and fore to aft and side to side fit are OK.

Any help appreciated,

Dave S.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Hood adjustment [200]
posted by  schwied  on Mon Nov 4 07:02 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.