Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B230 to replace B23F? 200 1983

posted by  Breadman on  Tue Dec 17 12:39 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Apr 18 04:46 CST 2012
[RELATED]

How much finageling would it take to swap a b230 into an 83 244? My B23F is clogged up in the block causing it to run hotter than normal, thus raising the Nox level. Removed the draincock in the block to flush out the coolant,cant poke an icepick into the passage!(Rusted up- no telling how clogged the water jackets are.) Expert Volvo mechanic recommends boiling(rebuilding) the block! Cost about $2K , car worth $1K. Huge sentimental value. Would I have to change the ECU? Known bad AMM. What about mating to the auto tranny, motor mounts? I can wrench it, but no welding or cutting. Thanks, Mark
--
'83 244GL 210K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B230 to replace B23F? [200][1983]
posted by  Breadman  on Tue Dec 17 12:39 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.