Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

I hate blower motors (help fast?!?!) 200 1986

posted by  unggthat on  Mon Dec 23 11:30 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Mar 6 10:37 CST 2014
[RELATED]

I'm baffled. I'm replacing the blower motor on my '86 240DL and everything was going fine, even until when I put the blower back in. it spun fine. But when I tried to put the two blowers on, everything went bad. The driver's side scrapes along the housing and I can't figure out how to make the motor sit correctly and centered so as to not make the fan blade rub on the housing. What have I done wrong? the old motor had not rubbed at all--it had just bound up and wouldn't turn inside. So what can I do? Did Siemens just design these things wrong and a bit different from OEM?? I tried adding a washer to one corner, but that just make problems elsewhere. please help..thanks!
nate gundy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New I hate blower motors (help fast?!?!) [200][1986]
posted by  unggthat  on Mon Dec 23 11:30 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.