Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

residue on dip stick

posted by  88turbo on  Fri Dec 27 10:08 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have an '88 760 turbo wagon with 154k on it. I'm seeing some residue or foamy looking gunk on the dip stick. I do notice that the crank case seems to have more pressure than normal when I open the oil fill cap. I replaced the fill cap gasket a couple days ago because of the oil coming out of the cap. I had the crank case ventilation device replaced a couple years ago. The gunk on the dip stick seemed to start soon after I had the turbo rebuilt which was about 20K ago but after that much mileage and the 6 oil changes since, all the junk from the rebuild should be flushed out. The engine runs strong but consumes about 1.5 quarts between 3K oil changes. Any ideas on the dip stick gunk & crankcase pressure ?
Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New residue on dip stick
posted by  88turbo  on Fri Dec 27 10:08 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.