Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Turbo Headgasket II 200

posted by  Robert S. on  Mon Jan 6 13:29 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 21 05:48 CST 2014
[RELATED]

Recall 84 245Ti with headgasket troubles a long way from home; so I am doing voyage repairs.

Car is back together, runs fine except for a pesky oil return line leak at top of the tube where two bolts affix it to Turbo. Any one against using permatex up there? Am going to have to disassamble it and try again. Other things went OK including new timing belt with advice from what I remember from the brickboard (sans manual). A Great knowledge resource!

Am without my Bentley manual since I am on the road 500 miles away from home... is the head retorqued after initial warm up while still warm or when it is cold? Specs that came w/gasket kit say 110 Nm for head bolts (about 80 ftlbs). Sound right?

I will recap when done.

Thanks

Robert





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turbo Headgasket II [200]
posted by  Robert S. subscriber  on Mon Jan 6 13:29 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.