Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Turbo Core 200 1983

posted by  DougMC on  Thu Jan 23 13:26 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

In the process of replacing my turbo core. Removing the turbo/exhaust manifold was cake compared to getting to the core. I have all the short bolts out and the front part off and I have the long (rear) bolts loose but I can't get the two pieces apart. Is there a trick to getting the core to break loose or is my hammer too small? Any help is appreciated.

Also see some surface cracks on the inside of the part that mates to manifold, should I have these welded?

Thanks

Doug

84 244 176K
83 245T 178K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turbo Core [200][1983]
posted by  DougMC  on Thu Jan 23 13:26 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.