Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

how to soder fuel injector grounds 200 1990

posted by  someone claiming to be volvocraze on  Thu Jan 23 21:04 CST 2003 [RELATED]

before i replace the ECU, i was wondering about sodering the fuel injector grounds to the lug. i have read a post in the archives that say the crimp that the grounds have are not good enough and need to be sodered. my question is why would the crimp work fine for years and all the sudden lose performance. i have changed everything else in the car, except for trying to soder the injector grounds, if anyone has any expireince, or knows how to soder a ground to the lug, the advise will be much appreciated, my ecu is 0 280 000 933 is this a good ecu or prone to failure,
with regards nick






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New how to soder fuel injector grounds [200][1990]
posted by  someone claiming to be volvocraze  on Thu Jan 23 21:04 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.