Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ball joint headache..... 200 1991

posted by  someone claiming to be Ben B9O on  Mon Jan 27 12:55 CST 2003 [RELATED]

Hi everybody,

I'm in the middle of replacing many things on the front end of my car (Tie rod ends, struts, upper strut mount, ball joints, etc.) and i've run into a small problem when attempting to reinstall my balljoints. Whenever I try to turn the nut to reattach the balljoint to it's mount that reattaches to the strut, the entire stud coming out of the balljoint rotates. I can't seem to come up with a good way to prevent the balljoints from rotating. I've tried pushing it forward with my hand, a C clamp, and various other approaches, all unsucessfully. I don't know if it matters, but my car is a 91' 240 with 205k miles, and I'm installing a TRW brand ball joint. If anyone has any insight on how to accomplish this, I would really appriciate it.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ball joint headache..... [200][1991]
posted by  someone claiming to be Ben B9O  on Mon Jan 27 12:55 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.