Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Belt Tension Problem 200 1983

posted by  static on  Sun Feb 2 11:47 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I appricate all the help on the last problem, it looks like the belts were hella bad, so i changed them and all looks to be working now. only problem is that the alternator/fan belts keep slipping. i cant figure out a good way to get them tight, cause there is no tensioner screw on the alternator bolt, so basically i had to wedge my hand in there and push as hard as i could while tightening the bolt, but obviously that didnt do it. so, any ideas/hints/tips on how to get the belts tight on that alternator?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Belt Tension Problem [200][1983]
posted by  static  on Sun Feb 2 11:47 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.