Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Turbo air intake hose 700 1989

posted by  spasske on  Wed Feb 12 08:53 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:11 CST 2014
[RELATED]

I replaced my air intake hose with the aftermarket MTC hose (MTC no. 6018, replaces volvo no. 1336711) . In addition to being a bit more of a stretch to get the hose to fit, the nipple that the PCV hose attaches to is about 1 mm smaller in circumference and does not fit tightly as the old one.

I now have a slight leak under boost. I am focusing on the PCV hose since I know it is not tight as the original. I could put a clamp on the hose, but it is actually rigid and am not sure if clamping it is advisable. Has anyone else used the MTC hose and encountered this?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turbo air intake hose [700][1989]
posted by  spasske  on Wed Feb 12 08:53 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.