Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Sticking ignition lock tumbler 200 1980

posted by  RAMontgomery on  Sat May 17 15:10 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jan 12 00:28 CST 2013
[RELATED]

The ignition key keeps sticking (won't turn sometimes) also won't retract when the key is removed (causing the chime to stay on) I can get the lock to function properly for a day or two if I spray (non greasy) contact cleaner in the lock. The contact cleaner fix is getting really old!

Is there any way to remove the lock tumbler with out removing the entire housing that is attached to the steering column?

I have had the electrical switch in the back removed but could not find any access to the lock from that end.

Thanks,
--
Richard Montgomery 83-244GL ; '90-780t; '92-940; '80-242DL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Sticking ignition lock tumbler [200][1980]
posted by  RAMontgomery subscriber  on Sat May 17 15:10 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.