Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B230 no start, crank sensor ring? 700 1989

posted by  solihull on  Sun Jul 27 15:31 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I let another mechanic install a spare engine in my spare 740. Shoulda been a plug and play but he blew it. Wouldn't idle and ran rough. Did all the checks, tracked it down to possibility that the ring gear, with the holes, was put on wrong and only barely ran. I was told to reindex it to where the blanked off part was under the sensor, with cylinder one at TDC, which I did. Now I've got a no start. At least before it would run but wouldn't idle. Looking in the Haynes manual for later 240 (covers this kind of FI) doesn't address how to put the gear on. Anyone run into this? Blanked off part was at about eight oclock, before I changed it.
Thanks for reading this, thanks even more for answering. I have two 740s, an 87 and an 89, which are my 4th and 5th seven series cars. Got enough stuff to build one more diesel if anyone's interested. Other interests are Land Rovers and Minis (real ones)
Cheers!
John Dillingham
Canton, Georgia






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B230 no start, crank sensor ring? [700][1989]
posted by  solihull  on Sun Jul 27 15:31 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.