Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Upper strut mount bearings 700

uid 55's pic
posted by  john sargent on  Sun Sep 21 16:13 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

I had been listening to a groaning, or creaking, sound coming from the left front side of my 745 for a couple of months when I was turning at slow speeds. I suspected the upper strut mount bearing and this weekend I had the time to investigate. The original bearing was made by INA in Germany, and had a total of 16 ball bearings in it. It refused to turn, and was sliding against the rubber of the upper strut mount. It is a light color, kind of a dirty white, and shown on the right hand side of the attached pictures.

The used SKF bearing (which I installed) had 46 ball bearings and is orange in color. It appears to be a much superior product.


I strongly recommend using the SKF bearing over the INA bearing.
--
john






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Upper strut mount bearings [700]
posted by  john sargent subscriber  on Sun Sep 21 16:13 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.