Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2005 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B20 waterpump question 140-160 1974

posted by  Kåre on  Tue Oct 21 12:23 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a leak where the heater return line feeds into the water pump on the right side of the engine. The return line has a small bracket welded onto it that is held in place by one of the waterpump mounting bolts. This bracket forces the pipe to mount to the pump at a very slanted angle, which causes the leak. Has anyone had the same problem and come up with a good fix? My immediate thought is to file an oblong hole in the bracket to allow for a more straight entry of the return line into the waterpump.

Kåre






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B20 waterpump question [140-160][1974]
posted by  Kåre  on Tue Oct 21 12:23 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.