Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Crank seal installation tool advice 200 1993

posted by  ranblacks on  Sat Nov 15 14:43 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

First off ... great site with great advice.
Secondly, I feel like an idiot posting this question! But here goes...
I have purchased the crank seal installation tool, but am having a difficult time understanding how to properly use it. Do I press the seal onto the tool by using the aluminum end and bolt supplied to press the seal onto the tool, then use the assembled installer and seal to insert the seal (minus the aluminum end and bolt)? or... Am I just overly thick in the head and am hopeless?
I also have he cam installer and it is somewhat intuitive, start the seal onto the cam and just tighten the bolt at the end of the installer, which press the seal in.

thanks in advance;
randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Crank seal installation tool advice [200][1993]
posted by  ranblacks  on Sat Nov 15 14:43 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.