Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Clunking struts. Tighten the shaft nuts? 700 1988

posted by  Erwin on  Mon Dec 29 06:44 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:39 CST 2014
[RELATED]

It's great to be driving 'ol blue again. The new clutch just feels like oiled velvet.

Now it's back to the little things I had planned to get to before the clutch problem sidelined me.

Both front struts clunk a bit. It's not the radius rod bushings. With the hood open, I can hold the bushing under the strut shaft nut and washer and feel it click (clunk) up and down as I bounce on the fender. There's about 1mm play between the bushing and the strut mount.

Can this be adjusted out by tightening the top 24mm nut on the strut shaft? I'll have to hold the shaft and use an offset box end wrench it looks like.

Strut cartridges and shocks are on the short list for the car. Probably in the next two months.
--
Erwin in Memphis, '88 745t 190,000 miles, '95 855t 92,000 miles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Clunking struts. Tighten the shaft nuts? [700][1988]
posted by  Erwin  on Mon Dec 29 06:44 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.