Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Water pump to head sealing point 900 1991

uid 6185's pic
posted by  blue940 on  Fri Apr 16 19:55 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 21:11 CST 2014
[RELATED]

Engine: B230FB

I've just changed all the seals on the water pump. I found the sealing area in the head above the water pump looks like this (in the pic). There is some slight pitting at the forward edge of the hole (pointing to the front of the engine). I managed to get rid of most the rusty bits with some find sandpaper but I'm concerned that it's just going to start leaking again. Can anything be done about it? It used to leak only when the engine was cold. Do you think it will start leaking again.

Any thoughts/suggestions appreciated.

Thanks

Brad







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Water pump to head sealing point [900][1991]
posted by  blue940  on Fri Apr 16 19:55 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.