Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2013 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

rear main seal replace, now on start 700

posted by  someone claiming to be joebark on  Wed Apr 21 00:09 CST 2004 [RELATED]

Does the flywheel need to be clocked to the crank sensor, I did not mark it's original position? Since the no start I've cleaned the throttle body and the flame trap [this was the original problem], changed the fuel filter, plugs, wires, cap and rotor. Car will start but die out with the slightest throttle touch. All I can think of is the crank sensor got hit during the trans removal or re-install. Any help appreciated Joe






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New rear main seal replace, now on start [700]
posted by  someone claiming to be joebark  on Wed Apr 21 00:09 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.