Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Injector O-ring replacement 200 1980

posted by  zrubin on  Sat May 8 14:35 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 20 15:45 CST 2012
[RELATED]

Going to replace the o-rings on my injectors while the head's at the machines shop. The one at the bottom of the holder is obvious, but what's the best method for pulling the injector out of the holder to get to the inner o-ring? Just bolt the holder to the head (when I get it back) and pull on the injector (this worked accidentally for one)?

Thanks

Zack
1980 245DL M46 272k
1988 745T+ M46 192k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Injector O-ring replacement [200][1980]
posted by  zrubin  on Sat May 8 14:35 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.