Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2002

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rear Engine Seal R&R

posted by  Zee on  Tue May 18 20:53 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 27 10:07 CST 2012
[RELATED]

Despite rearding the excellent procedural notes by John Sargent, et. al. about this job

(See: http://www.brickboard.com/FAQ/700-900/EngineSealsBeltsVent.htm#LeakingRearSealandReplacementTips)

I still can't see how to actually remove the seal from the carrier plate, and press in the new seal. (I printed out the seal press tool design from the "Tools" photo gallery)

Any tips?

It looks like the old seal (gray, probably Viton) has a metal ring which is pressed against the housing bore. I can't see hos this could be pulled out without removing the entire ho8sing and seal from the rear of the engine.

Now that I can see it oout of the car, I still need a way to pull and press the seal.

Don't want ot take it to a shop, due to rental return deadline for the transmission jack. Plus, I'm cheap.
--
'Can't understand why people abort Volvos, either'






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear Engine Seal R&R
posted by  Zee subscriber  on Tue May 18 20:53 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.